switching tv's with WII

[Drizzt Do'Urden]

Got a PS3 when it was out . it's juste awesome , but it's not the point

Bought a Wii between Xmas and new year . Was at the GF place , we were playing on 22'' tv . Now i bring it to my home to play on my 96'' HDTV projector.

The remote is acting exactly like if i'm playing on the 22'' tv , but on the 96'' one . i juste make a little move and the controller goes from one side to another . and it doesn't stop shaking

is there a way to , like , ''format'' the sensor bar so it will work on my tv ?

i can't play wii sports nor zelda , since it's acting crazy . I'm trying to play golf but it doesn't stop shaking....

thanks a lot !

Drizzt

[Ads]

[Riviet]

Try to navigate your way with your shaky on-screen hand to the Wii settings. Once there, go to page 2 and select sensor bar settings and go to sensitivity. Good luck and I hope that helps solve your problem.

[Drizzt Do'Urden]

did that . not changing anything. i need to point upward for the cursor to be in the middle fo the screen , and when i point like 1 degree downward , it goes directly to the bottom.

Drizzt

[Wii17]

try setting sensor bar position to top and put it on the bottom

[Drizzt Do'Urden]

can't , it's a projector screen . there's nothing on the bottom

Drizzt

[loizoskounios]

The only thing I can think that can make a change has been mentioned before, sensitivity. You could also try sensor bar position but first you need to come up with something in order to place the sensor bar and not let it floating.

[Drizzt Do'Urden]

i'll ask my sister to hold it while i play

Drizzt

[vagrant]

can't , it's a projector screen . there's nothing on the bottom

Drizzt

You have to have the sensor bar positioned somewhere. And it is probably either below or above the projection screen. In which case you have to make sure the wii's settings are set accordingly.

[Drizzt Do'Urden]

the bar is above the screen , and the wii setting are ok

Drizzt

[loizoskounios]

Have you tried changing the sensitivity in both ways ? You mentioned that it gets from the highest end to the lowest with just a single move. Try lowering the sensitivity if you haven't. (or increasing it for that matter, you never know)