Wiimote Question

[Mau]

ok, step by step, go to the home screen, and click wiimote settings, then click reconnect, leave the first wiimote alone, do not touch any button. press one and two in the second wiimote (the one that came with wiiplay) It will be first player now, ok, after screen of connecting is gone, press home 2 times, then open the sd card slot on the wii and press the red button, also take the batteries cover on the wiimote off and press the red button, you can do it at the same time or, the wii first then the wiimote... and you should have it...

[Ads]

[ajvizzgamer101]

Do the WiiPlay one first then the other one second. Then turn off and use the WiiPlay on to turn it on.

Just try different things, lol

[Pinoy]

ok, step by step, go to the home screen, and click wiimote settings, then click reconnect, leave the first wiimote alone, do not touch any button. press one and two in the second wiimote (the one that came with wiiplay) It will be first player now, ok, after screen of connecting is gone, press home 2 times, then open the sd card slot on the wii and press the red button, also take the batteries cover on the wiimote off and press the red button, you can do it at the same time or, the wii first then the wiimote... and you should have it...

I know that... But how can I use the WiiPlay Wiimote to turn the Wii on?

Do the WiiPlay one first then the other one second. Then turn off and use the WiiPlay on to turn it on.

Just try different things, lol

I guess it's worth a shot.

[Pinoy]

That didn't work either...
Any other ideas?

[Mau]

that should work...

ok try this..... hold the red button on the wii for 15 seconds, then the wii will clear all the wiimote in the system... then take the wiimote that came with wiiplay and sync it with the wii, and if that doesn't work, I guess you should change the wiimote that came with the wiiplay

[LevesqueIsKing]

*sigh* read through the wii's handbook. There it tells you that there are TWO ways to sinc a wii remote. The first is a temporary way (which I presume you used) that unallows the remote to turn the system on or off. The second way is the permanent way, this allows all of your remotes equal power in turning the system on and off. This way there is no 'player one' remote and 'player two' remote, it all depends on which one turns the system on.

Im not going to search through my manual to find out how to do the permanent way, because I already did it to mine and thats your job anyway. I think its something like
1. Start Wii
2. When the 'press A' screen comes up, press the sinc button on your wii remote
3. Once your remote's lights begin to flash, press and hold the wii's sinc button (located inside the sd card flap) for 15 seconds

Dont quote me on that, because it could be wrong.

Rep if you found helpful

[Wiisdom-Warrior]

I have two Wiimotes. One that came with the Wii and one that came with WiiPlay. I was wondering if it's possible to start the Wii with the Wiimote that came with WiiPlay? And if it is possible, how? Because I can't start the Wii with that Wiimote.

Does it realy matter that much? As long as you can use your that wii remote as player 1 then why do you need to turn on the wii with it?

[thetrufinder]

umm.. im not sure about this
i also ahve two wii remotes and when its the start up screen on the wii whichever one i press A with first becomes player 1
at least i think

[LevesqueIsKing]

^This is what should happen if you permanently synch both remotes.