Hi all- read a bunch of problems connecting the Remotes.

The Remotes use Bluetooth- the Wii and the Remotes have to "find each other" to communicate. There are 2 ways to connect remotes- "permanent" or "temporary".

To connect remotes "permanently", press the red Sync button on the Wii (open the SD Card cover,) then press the red Sync button on the remote (open the battery cover.) It will blink then show one LED.
-When you turn the system on, the first to hit "A" will be player 1, the second player 2, etc...
----To UNSYNC hold the red sync button on the Wii for 15seconds.

To connect "temporary" hit the home button (At any time! Even in the middle of a game!) and click the bottom of the screen- for remotes. When it says to press "1 and 2" do so and let go. The remote LEDs should blink then show a player number LED.

--------------------------------------------------

The sensor bar is nothing but a pair of infrared lights, like remote controls use. Invisible to you and me but the remote watches them and how they're moving. Supposedly you could use 2 candles about 6inches from each other or someone constantly holding the buttons on 2 TV remote controls (Since they emit infrared light..)

When you set sensitivity it WILL be backwards from the way you're moving the remote.

Hope this helps someone..