LoginRegister
Nintendo Wii / Wii U Forum
+ Reply to Thread
Results 1 to 9 of 9
  1. #1
    Junior Member millstream's Avatar
    Member #
    49778
    Join Date
    Feb 2008
    Posts
    3
    Friends
    0
    Wii Friend Code: $post[field5]

    Is there any help?

    Here's my problem as best I can explain it...

    I have the sensor bar placed about 10" below my wall mount tv. We can do bowling and any sports game that doesn't require you to point the remote at the screen directly. The only way we can get the pointer to work is to point the remote at the ceiling light then the hand (pointer) appears on the tv and we can only move the pointer while the remote is pointed at the ceiling light. I hope you understand what I am trying to say but in a nutshell I have to point at the light to make the pointer on the tv move. Also, when I turn the ceiling light off I can't move the pointer at all. Can someone please help?

  2. #2
    Junior Member hornjt's Avatar
    Member #
    44926
    Join Date
    Jan 2008
    Posts
    3
    Friends
    0
    Wii Friend Code: $post[field5]
    My guess would be make sure the sensor bar is level front to back. Sounds like it is pointing more up toward the ceiling.

  3. #3
    . ☆ ☆ ☆ . gidget's Avatar
    Member #
    40723
    Join Date
    Dec 2007
    Location
    -= ohio, usa =-
    Posts
    2,589
    Friends
    54
    Wii Friend Code: $post[field5]
    9999-9999-9999-9999
    • your sensor bar is not emmiting invisible IR light... is it plugged in?
    • is it a wireless sensor bar, weak batteries, or turned off?

    take a camera cell phone and take a picture of your sensor bar, believe it or not, your camera phone WILL see the invisible IR light from the sensor bar...

    if you don't see the light through the camera phone then:
    • you have a bad sensor bar
    • or damaged sensor bar cable. (assuming it's plugged in and the Wii is powered on)
    if your camera phone shows the sensor bar's light bulbs then adjust the remotes sensitivity to 3 or higher... read here for directions to adjust sensor bar sensitivity
    Last edited by gidget; 02-07-2008 at 12:33 PM.

    ..

    click logo to join the...
    rainbows & unicorns clan!


  4. #4
    Junior Member millstream's Avatar
    Member #
    49778
    Join Date
    Feb 2008
    Posts
    3
    Friends
    0
    Wii Friend Code: $post[field5]
    I'll look at replacing the whole bar.

    Thanks!

  5. #5
    Tech Support nxcmp's Avatar
    Member #
    47959
    Join Date
    Jan 2008
    Location
    USA
    Posts
    254
    Friends
    0
    Wii Friend Code: $post[field5]
    0000-0000-0000-0000
    Goto the Wii's settings menu for the sensor bar and up the sensitivity. That will intensify the amount of output the 2 Infrared LEDs in sensor bar emit. It will be easier for the Infrared cameras in the Wii Remotes to pick up the sensor bar more easily.
    Last edited by nxcmp; 02-07-2008 at 01:17 PM.

    Check my Profile for information on my PC Tech Support services.
    -----------------------------------------------
    Check my Blog for "Program of the Week" every Tuesday. Suggestions welcome, PM me.

  6. #6
    . ☆ ☆ ☆ . gidget's Avatar
    Member #
    40723
    Join Date
    Dec 2007
    Location
    -= ohio, usa =-
    Posts
    2,589
    Friends
    54
    Wii Friend Code: $post[field5]
    9999-9999-9999-9999
    really, the camera phone will save you a call to tech support, unless you need a warranty replacement.... not just a camera phone, but perhaps any digital camera... USB PC cam, photography.

    ..

    click logo to join the...
    rainbows & unicorns clan!


  7. #7
    Junior Member millstream's Avatar
    Member #
    49778
    Join Date
    Feb 2008
    Posts
    3
    Friends
    0
    Wii Friend Code: $post[field5]
    I messed the whole thing up last night... I forgot that you said I needed a camera to view the infrared light... Anyway, I destroyed the whole bar as I tore it apart but was able to power it with a 9 volt battery and view the light w/ my cell phone. Only problem is I didn't verify if the sensor bar was ever being powered by the console or not. By being able to power it with the 9 volt I still don't know if the problem was in the wire, plug or console. I am convinced the sensor bar was not working from the start. I called Nintendo and explained the whole situation to them... I have never dealt with a company so willing to satisfy their customers. I told them I needed to buy another sensor bar because I destroyed the original one. Nintendo said nope, it was under warranty and is sending me a new one. Kudos to you, Nintendo!

  8. #8
    . ☆ ☆ ☆ . gidget's Avatar
    Member #
    40723
    Join Date
    Dec 2007
    Location
    -= ohio, usa =-
    Posts
    2,589
    Friends
    54
    Wii Friend Code: $post[field5]
    9999-9999-9999-9999
    Quote Originally Posted by nxcmp
    Goto the Wii's settings menu for the sensor bar and up the sensitivity. That will intensify the amount of output the 2 Infrared LEDs in sensor bar emit. It will be easier for the Infrared cameras in the Wii Remotes to pick up the sensor bar more easily.
    nxcomp, adjusting the sensitivity does not increase power to the sensor bar, bulbs... it simply adjusts the remotes brightness/contrast to receiving light...

    therefore, the remote will be more or less sensitive to other light-emitting bulbs or light reflections that are rather close to your sensor bar so the remote won't sense the interference...

    ..

    click logo to join the...
    rainbows & unicorns clan!


  9. #9
    Tech Support nxcmp's Avatar
    Member #
    47959
    Join Date
    Jan 2008
    Location
    USA
    Posts
    254
    Friends
    0
    Wii Friend Code: $post[field5]
    0000-0000-0000-0000
    Quote Originally Posted by idjut
    nxcomp, adjusting the sensitivity does not increase power to the sensor bar ------ it simply adjusts the remotes brightness/contrast to receiving light...
    Ok fine, it "enhances detection". What I said was wrong but it's a still similar idea.

    Check my Profile for information on my PC Tech Support services.
    -----------------------------------------------
    Check my Blog for "Program of the Week" every Tuesday. Suggestions welcome, PM me.

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Search tags for this page

does wii sensor bar have to be level front to back

,

wii sensor bar mount

,

wii sensor bar to be level

Click on a term to search for related topics.