LoginRegister
Nintendo Wii / Wii U Forum
+ Reply to Thread
Results 1 to 4 of 4
  1. #1
    Junior Member jdavis's Avatar
    Member #
    40282
    Join Date
    Dec 2007
    Posts
    4
    Friends
    0
    Wii Friend Code: $post[field5]

    wii remotes won't talk to unit

    Tried new batteries and resynch and power cycle. Any other ideas? System only 3 months old.

  2. Ads


  3. #2
    WiiChat Member FatSamTAS7's Avatar
    Member #
    54314
    Join Date
    Mar 2008
    Location
    Pennsylvania
    Posts
    40
    Friends
    0
    Wii Friend Code: $post[field5]
    There could be a reflection on your whole sensor bar. I read to put a clear material like a Kleenex over the sensor bar will fix this. Good Luck

  4. #3
    Is mayo an instrument? Axl Rose's Avatar
    Member #
    32468
    Join Date
    Aug 2007
    Location
    Saugus, CA
    Posts
    264
    Friends
    13
    Wii Friend Code: $post[field5]
    0000-0000-0000-0000
    Last time I checked, Wii Remotes don't talk. But yeah, Do what he says. ^

    LISTEN TO



  5. #4
    WiiChat Member bradleyd's Avatar
    Member #
    55499
    Join Date
    Jan 2009
    Location
    Canada
    Posts
    184
    Friends
    0
    Wii Friend Code: $post[field5]
    0000-0000-0000-0000
    Turn the Wii console power OFF by pressing the POWER Button on the front of the console. Unplug the power cord from the wall outlet for a few seconds. After a few seconds have elapsed, plug the cord back into the wall outlet.
    1. Turn the power of the Wii console ON. When you see the Health and Safety screen, open the small flap on the front of the Wii console to find a red button labeled "SYNC." Press and hold the SYNC Button down for 15 seconds. This will clear all the syncs on the Wii, allowing you to get a clean start to begin the process described below.
    2. After holding the SYNC Button on the Wii console down for at least 15 seconds, you can now "re-sync" your Wii Remotes:
      1. With the first Wii Remote you wish to sync, remove the battery cover on the back of the Wii Remote to find a small red button just below the batteries.
      2. Press and release the small red button just below the batteries on the Wii Remote; the blue lights on the front of the Wii Remote will blink.
      3. Quickly press and release the red SYNC button on the inside of the white flap on the front of the Wii console (picture).
      4. When the Player LED blinking stops and stays lit, the syncing is complete. The LED that is illuminated indicates the player number (1 through 4).
      5. This sync procedure (steps "a" through "d" above) must be followed for each additional Wii Remote added to the system.
    http://www.nintendo.com/consumer/sys.../wiiremote.jsp

Ads

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts

Search tags for this page

how do you synch a wii unit?
,
power a wii remote won't sync
,
sync power a wiimote
,

wii remote won't sync

,
wii remote wont speak with console
,

wii remote wont sync

,

wii remotes won't sync

,
wii remotes won't talk to wiu
,
wii won't talk to remote
,

wiimote won't sync

,
wiimote wont sync power
,
wiu remote won't turn on
Click on a term to search for related topics.