projector and wii

byronw2222 · 12-26-2006, 05:16 AM

hey im new to all this just bought a projector benq mp610 and a wii and i have NO CLUE how to set it up can someone draw a picture or write up the best way to set up a projector and wii?

it would be most appriciated thanks

wii.knee · 12-26-2006, 05:23 AM

use the rca, plug the red cable in the red port, yellow cable in the yellow port, and white cable in the white port.

lolz · 12-26-2006, 05:25 AM

you might also want to get a wirless sensor bar too.

AussieWii · 12-26-2006, 06:15 AM

i have mine hooked up to the projecdtor using component cables

it works a treat

you have to calculate the size of your screen to work out how far away to place the projector
well i did anyway cause i installed it on the roof
if its just on a table you cabn move the tablke at will

but if its on the roof where u put it is where it stays so you have to know the meausrements

byronw2222 · 12-26-2006, 10:11 AM

i have in advance bought the component cables but i dont know where to put em not enough holes? and wont the sensor bar be out of wack cos of the sixze of the screen?

AussieWii · 12-26-2006, 10:24 AM

sensor bar works fine

if your projector isnt component capeable then you cant do it

look for green blue and red holes
then your audio goes into a amplifier or a stereo

OV SPYDA MAN · 01-06-2007, 12:10 AM

Any 1 adding me please email at pmcfadden35@sprintpcs.com. With name and F.C. thanks

Calvinhedge · 01-06-2007, 02:54 AM

Quote:

Originally Posted by lolz

you might also want to get a wirless sensor bar too.

They have those? Where can you get those? Also, doesn't direct light mess up the Wii remotes?

ClassicFitness · 01-06-2007, 03:52 AM

Quote:

Originally Posted by Calvinhedge

They have those? Where can you get those? Also, doesn't direct light mess up the Wii remotes?

There it is..... http://www.wirelesssensorbar.com/

callme.nasty · 01-06-2007, 03:54 AM

i think i'm also going to hook my wii up to my projector (if i can ever find one). My projector is component capable, so it should be easy? Should be sweet playing a wii on a 130" TV. Should be sweet playing a wii at all....

surkhail · 01-06-2007, 06:50 AM

I ALSO OWN A BENQ MP610 what i did is get a dub to component cable so it can take component cables after u get that make ur sensor bar wireless like i did just cut the wires and conect a 9v batt or adabter that works like a charm and ur ready to go just keep the mode in the projector on PHOTO i find in mp610 that works best good luck