Wii AK-47 Mod

CantGetAWii · 01-11-2008, 01:53 AM

[MEDIA]http://www.youtube.com/watch?v=tdN4Dknu_Gc[/MEDIA]

Quote:

Nintendo's Wii, in case you didn't know, is a video game system with motion sensitive controls. The controls consist of a nunchuck (handheld unit with a thumb-joystick) and the wiimote (which is a wand-like controller used to point at the screen. Both are button-laden and motion sensitive.

I took a plastic AK-47 and removed the insides, then repackaged and rewired as necessary to move the wiimote IR-sensor into the muzzle and wire up the trigger with a switch. Also, the nunchuck was mounted like a vertical grip so it can be easily grasped and used.

This allows the AK to function much like the Wii Zapper, in that gun-like aiming can be done and the motion sensing is still intact. However, unlike the zapper, the AK-47 is far cooler.

I made this partly to see if it would offer improved control in games.

I suppose it does offer some amount of improved control, but mostly it's just more fun to use.

But I mainly did it just for the experience of using an AK rifle butt to smack the choirists singing out of tune in Rayman Raving Rabbids

Fundamentally we are doing two electrical things - the rest is cosmetic:

1: we are extending out some wires attached to the contacts for the "B" button (and I would recommend also the "A") - these will attach to switches to be used as triggers.

2: the IR camera on the front of the wiimote will be removed and re-mounted remotely. So, we'll need a lot of suitably thin cables and the ability to solder small connections.

The cosmetic parts consist of mounting the nunchuk somewhere comfortable, and mounting the other parts into and onto a body or shell. I used a plastic, mostly hollow AK-47. There's no reason you couldn't use something else; perhaps even a glove of some sort.

Construction Details

First, the wiimote needs to be disassembled - you will need a special Nintendo screwdriver for this. One source for them is a place like DealExtreme.

The black component at the front is the IR sensor/camera. It needs to be removed, so de-solder it carefully. Save the black plastic in front of the sensor. It helps shield the camera from ambient light and should be replaced in front of the camera wherever you decide to mount it.

After removal, wires should be carefully soldered to the camera, and the other ends soldered to the matching holes on the wiimote circuitboard.

Afterwards would be a good time to make sure the wiimote still works. If not, make sure you have no solder bridges or wiring errors.

The other thing that needs doing is to locate the contacts for the "A" and "B" buttons and attach small, thin wires to them so that they can be attached to remote switches, which will serve as triggers.

The image shows the "B" button's wiring. The "A" button is on the opposite side of the wiimote and should also be done.

If you use suitably thin wire (like wire-wrap wire) the wire should be flush enough so that it doesn't interfere with the button operation, allowing the A and B buttons on the wiimote to continue to function normally.

This would be a good time to fire the Wii up again and make sure the controller still works. The "A" and "B" buttons should be triggered by touching their respective wires together momentarily.

Now all that's left is to attach some switches to the A and B button wires, and fit those switches and controller guts (or the entire controller, if there is room) into whatever you want.

Packing it into the AK shell

Here are some pictures showing how I did the final assembly for my Wii AK-47.

The IR camera (with the black plastic IR shield replaced in front of the camera) went onto the muzzle. The camera was too large to fit inside the AK's actual muzzle opening, so I made a small enclosure to hold it securely.

The switch for the main trigger gets attached to the wiimote "B" button. A smaller, secondary trigger switch was installed for the less-used "A" button.

The nunchuck was left intact, but I made a moulded holder for it out of sintra (PVC foam board). The board was cut to shape and heated with a heat gun until soft, then moulded around the nunchuk. After the sharp edges were trimmed, a spot of hot glue holds it snug, and the whole thing was hot-glued to the AK's handguard.

This allows the nunchuk to be held like a vertical grip, isn't TOO much of an eyesore, and keeps the nunchuk 100% functional.

Some Technical Issues / Lessons Learned

A number of issues came up while making and using the Wii AK-47.

Games are not consistent with whether they use the A button (top of the wiimote) or the B button (bottom of wiimote) as the "trigger". For example, Rayman Raving Rabbids likes to use the "A" button a lot but Link's Crossbow Training uses the "B" button. This means that if you want flexibility, you either need two triggers (one for A and one for B) or some means of switching between the two. I made two triggers.

Playing on a projector or other large screen means that the wiimote's "mouse pointer" will not always line up with the sights. The pointer behaves consistently BUT it is not always exactly where you are actually aiming, rifle-wise. It's best to play on a normal sized TV. (There might be a way to solve this - I have experimented with adjusting the width of the sensor bar but no luck yet.)

Source:
http://imakeprojects.com/Projects/wii-ak47/

Abes16 · 01-11-2008, 02:04 AM

that would be mad but i wouldnt give it a go

kronau · 01-11-2008, 02:09 AM

probly illegal in canada

wario2ooo · 01-11-2008, 06:07 PM

lol....wow...he got whack with the AK!

Samus101 · 01-11-2008, 06:09 PM

Wow, that is pathetic.

Cpt.McCloud · 01-11-2008, 06:15 PM

Quote:

Originally Posted by Samus101

Wow, that is pathetic.

Care to elaborate?

wario2ooo · 01-11-2008, 06:19 PM

makes me wonder...how do you reload?......do you have to shake it like in RE:UC?

Samus101 · 01-11-2008, 07:17 PM

Quote:

Originally Posted by Cpt.McCloud

Care to elaborate?

Hooking up a Nunchuk to an AK is just pathetic, and it looks stupid.

Cpt.McCloud · 01-11-2008, 07:29 PM

Quote:

Originally Posted by Samus101

Hooking up a Nunchuk to an AK is just pathetic, and it looks stupid.

Isn't the zapper and all other light guns like this apart from less realistic?

So, you'd rather have cheap plastic replacements than the real thing?

technodj · 01-11-2008, 07:34 PM

Quote:

Originally Posted by Samus101

Hooking up a Nunchuk to an AK is just pathetic, and it looks stupid.

Agreed.

Samus101 · 01-11-2008, 07:58 PM

Quote:

Originally Posted by Cpt.McCloud

Isn't the zapper and all other light guns like this apart from less realistic?

So, you'd rather have cheap plastic replacements than the real thing?

I hate them both. Why not just use a Nunchuk and Wiimote without stupid plastic stuff?

Cpt.McCloud · 01-11-2008, 07:59 PM

Quote:

Originally Posted by Samus101

I hate them both. Why not just use a Nunchuk and Wiimote without stupid plastic stuff?

To offer an immersing experience like the wii was designed for.

FR. · 01-11-2008, 08:05 PM

I agree with the fact that plastic add-ons (like guns) look horrible on the Wii's Wii Remote/Nunchuk. However, as long as the person who purchases it enjoys it, that's all that matters. This Wii AK-47 doesn't live up to my standards though.

261311 · 01-11-2008, 10:16 PM

Meh, crappy look to it but I found the end of making the mask useful.

jimbo · 01-12-2008, 12:15 PM

^ lol same...does look cool if they make m4a1 mods etc

Monsteroids · 01-12-2008, 12:22 PM

Quote:

Originally Posted by kronau

probly illegal in canada

Why do you say that? I mean the piracy laws there already suck.

God I wanna be there at the moment.

261311 · 01-13-2008, 04:17 AM

Quote:

Originally Posted by Monsteroids

Why do you say that? I mean the piracy laws there already suck.

God I wanna be there at the moment.

I'm sure you do.

Meh, Imitation guns aren't illegal in Canada, just looked down upon (like every other crime; 5 years for murder? pssh).

kronau · 01-13-2008, 04:21 AM

Quote:

Originally Posted by 261311

I'm sure you do.

Meh, Imitation guns aren't illegal in Canada, just looked down upon (like every other crime; 5 years for murder? pssh).

nothin that evin looks like a gun can cross the border it has to be see thru of have a orange tip and the only guns alloud are hunting guns if u have a licence or police guns if ur a cop anything elce illegal